Hand Tool Preservation
Association of Australia Inc

W.H. Blakeley Factory as it was in 1924W.H. Blakeley Factory as it was in 1924James is reputed to have assembled his planes at the works of W. H. Blakeley & Co at 115 Lonsdale Street Melbourne (here is a link for more information on W. H. Blakeley & Co).

It has been suggested that Coffin Smoother, Jack and German Jacks were made, however there has not been a reported sighting of the German Jack. The few Jack planes seen may be consistent, however of the several Coffin Smoothers to hand, all are slightly different, be it the size of base, width of blade, blade marked or otherwise reflecting the various stages of development of the mechanism. Some bodies are stamped 'PAT APPLIED FOR' or 'PAT 15443, 4-6-20'.

The patent on the James' mechanism was taken out during 1920, granted 4-6-1920. The patent (see diagram below) was for "Improvements relating to wood-planing tools" and involved eliminating the need for the wedge, reducing the cost of manufacture and allowing use of a wider range of timber as it did not require the high strength timber due to reduced stress normally caused by a wedge. The complete original patent application can be viewed here: Patent No. 15,443/20.

Click on the images to see the full size image.

Diagram from James plane Patent 15443 4 6 20 sm

James planes are not common and the Jack is somewhat rarer than the Smoother.

If anyone has a German Jack please make contact with the Curator.

Thanks to Rod Thomas and Robert Saint for the above information and images.

The HTPAA welcomes any additional information, pictures and ephemera relating to these tools or any other Australian Makers.

Contact the Australian Collection Curator.

Tools and Trades Day

HTPAA's Tools and Trades Day is on July 7th 2018 9.00 am to 4.30 pm at St Anthony's Parish Hall (Tool Sale location).
The 2018 Day features nine expert speakers who will discuss and demonstrate their tools in the trades of colonial cabinet making, coopering, jewelry making, harness making, the early mechanics tools, pattern making, plumbing and shipwright/sail making.
For more information see the Tool and Trade Day page.

Next Tool Sale

The next Tool Sale is on Sunday 8th July 2018 9.00 am to 12.30 pm at St Anthony's Parish Hall 164-168 Neerim Rd (corner Neerim & Grange Rds), Carnegie
Melway Ref. 68 F4 or see the map here. For more information see the Tool Sale page.

Go to top