Hand Tool Preservation
Association of Australia Inc

Page 5 of 21 Results 241 - 290 of 1048

Tool Chest ContentsOrder by: Article No SubjectAuthorCategoryYear

Subject: Dating Stanley Tape Rules

Description: An identification chart of Tape Rules
Author: Graeme Plaw
Vol: 22Year: 2010Month: November
Category: Rule   Topic: Tape


Subject: Davelco

Description: A detailed explanation
Author:
Vol: 8Year: 1996Month: August
Category: Plane   Topic: Davleco


Subject: Defining Hand Tools

Description: Hand & Power challenged
Author: Anthony Keen
Vol: 15Year: 2003Month: February
Category: Collecting   Topic:


Subject: Desgn of Hand Drills

Description: S shaped spoke explained.
Author:
Vol: 9Year: 1997Month: May
Category: Hand Drills   Topic: Design


Subject: Design & use of the Saw Nib

Description: Example shown/ information sought
Author: Nigel Lampert
Vol: 4Year: 1992Month: June
Category: Saws   Topic: Saw Nib


Subject: Design Features of Stanley Hand Drills

Description:
Author: Richard Williams (m)
Vol: 29Year: 2017Month: February
Category: Hand drills   Topic: Design


Subject: Design of Hand Drills -II

Description: Foundry Practice detailed
Author: Cliff Walsh
Vol: 9Year: 1997Month: August
Category: Hand Drills   Topic: Foundry


Subject: Development of Sheep Shearing Machines in Australia

Description: A detailed explanation
Author: Jim Donaldson
Vol: 10Year: 1998Month: November
Category: Shear   Topic: History


Subject: Dictionery of woodworking Tools

Description: A book reviewed
Author: R A Salaman
Vol: 10Year: 1998Month: February
Category: Book   Topic: Dictionary


Subject: Disposal of a Collection

Description: Detailing methods of disposal
Author: Doug McIver
Vol: 12Year: 2000Month: August
Category: Collecting   Topic: Disposal


Subject: Disston and Morss

Description: A brief company history
Author: Frank Ham
Vol: 21Year: 2009Month: February
Category: Level   Topic: Disston


Subject: Disston No10 Imperial Saw Tool

Description: Sharpening Saws
Author: Disston
Vol: 1Year: 1989Month: February
Category: Saws   Topic: Disston


Subject: Don’t be a mug - Never Volunteer.

Description: A thought starter
Author: Jim Donaldson
Vol: 13Year: 2001Month: May
Category: Collecting   Topic:


Subject: Dr Frank Ham

Description: Frank Ham's Collecting Interest explained
Author: Laurie Lewis
Vol: 23Year: 2011Month: August
Category: Collecting   Topic: Ham


Subject: Draw Knives and their Relatives

Description: A drawknife review
Author: Ian Stagg
Vol: 21Year: 2009Month: May
Category: Knife   Topic: Drawknife


Subject: Drawknife & Shaving Horse

Description: An explanation to Club members
Author: Alan West
Vol: 5Year: 1993Month: June
Category: Knife   Topic: Draw Knife


Subject: Drawknives - Bevel up or Bevel Down?

Description: A discussion on Drawknife uses.
Author: Doug McIver
Vol: 10Year: 1998Month: February
Category: Knife   Topic: Drawknife


Subject: Dry Stone walls

Description: Some background
Author: Doug McIver
Vol: 12Year: 2000Month: February
Category: Skills   Topic: Dry Stone


Subject: Duigan's Patent Plug Spanners & Some Other Inventions

Description:
Author: Warren Hewertson (m)
Vol: 25Year: 2013Month: February
Category: Maker   Topic: Duigan


Subject: E A Berg Sweden

Description: A history
Author: Watson Cutter
Vol: 15Year: 2003Month: August
Category: History   Topic: E A Berg


Subject: Early Australian Toolmakers 1788 - 1939

Description: Conference Presentation March 2000
Author: John D McDonald
Vol: 12Year: 2000Month: November
Category: History   Topic: Toolmakers


Subject: Early Bailey Planes - Some Ramblings

Description:
Author: Mick Dowling (m)
Vol: 26Year: 2014Month: February
Category: Plane   Topic: Bailey


Subject: Early English Adjustable Wrenches found in Australia

Description: English Adjustable wrench study
Author: Hawking/Geesin
Vol: 20Year: 2008Month: February
Category: Wrenches   Topic: History


Subject: ebay

Description: A How to use the Computer auction site
Author: Mick Dowling
Vol: 17Year: 2005Month: November
Category: Auction   Topic: Ebay


Subject: Editor's Note

Description:
Author:
Vol: 28Year: 2016Month: November
Category: Note   Topic: Editor


Subject: Editor's Note - Windmills

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editor   Topic: Windmills


Subject: Editorial Comment - HTPAA Publications

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editorial   Topic: Publications


Subject: Electro Borac Steel

Description: Heat Treatment Explanation
Author: Ian McIntosh
Vol: 6Year: 1994Month: August
Category: Steel Manf   Topic: Electro Borac


Subject: Electrolytic Removal of Dust

Description: Rust removal practice explained
Author: Kevin Chamberlain
Vol: 14Year: 2002Month: February
Category: Cleaning   Topic: Electolytic


Subject: Elegy on a Suburban Tool Chest

Description: Old Tools explained
Author: Roy Fuller
Vol: 9Year: 1997Month: May
Category: Collecting   Topic: Tool Chest


Subject: Engineering in History

Description: A book reviewed
Author:
Vol: 12Year: 2000Month: November
Category: Book   Topic: History


Subject: Engineers Rule & The Phoenix Factory

Description: An early foundry explained
Author: Frank Ham
Vol: 18Year: 2006Month: February
Category: Phoenix   Topic: Foundry


Subject: Engineers' Joint Slide Rules

Description:
Author: Bruce Sandie (m)
Vol: 28Year: 2016Month: February
Category: History   Topic: Slide Rule


Subject: English Sectors & their use

Description: An Explanation
Author: Bruce Sandie
Vol: 18Year: 2006Month: February
Category: History   Topic: Garden Tools


Subject: Ephemera a link with the Past

Description: The importance of paper
Author: Ken Turner
Vol: 13Year: 2001Month: August
Category: Collecting   Topic: Ephemera


Subject: Eric Risstron's Patented Axe Stand

Description:
Author: Graeme Plaw (m)
Vol: 26Year: 2014Month: May
Category: Axe   Topic: Stand


Subject: Ethical Dilemmas - A response

Description: A response to Jim Donaldson
Author: Milt Boyd
Vol: 13Year: 2001Month: May
Category: Collecting   Topic:


Subject: European Concealed Hinge Morticing Chisels

Description:
Author: Svatopluk Odstrcilik (m) & Warren Hewertson (m)
Vol: 25Year: 2013Month: February
Category: Chisels   Topic: Morticing


Subject: Excise & Gauging Slide Rules

Description: Slide Rules explained
Author: Bruce Sandie
Vol: 14Year: 2002Month: August
Category: Rule   Topic: Slide Rules


Subject: Faience

Description: Construction & Application
Author:
Vol: 3Year: 1991Month: June
Category: Glazing   Topic: Wall Tiles


Subject: Farriers Horseshoe Gauge

Description: A Guage explained
Author: Frank Ham
Vol: 18Year: 2006Month: February
Category: Farrier   Topic: Gauge


Subject: Faults in your Plane

Description: Evans Bros Chart
Author:
Vol: 16Year: 2004Month: May
Category: Plane   Topic: Evans Bros


Subject: Fencing & Wire Strainers

Description: A detailed report
Author: Lyle Ruddell
Vol: 12Year: 2000Month: May
Category: Fencing   Topic: Strainer


Subject: Fine Work with Few Tools

Description: A Craftsmans story
Author:
Vol: 8Year: 1996Month: May
Category: Collecting   Topic: Story


Subject: Finger planes

Description: A reprint from TTHS Newsletter No 50
Author:
Vol: 9Year: 1997Month: February
Category: Plane   Topic: Finger


Subject: Fire Branding Sheep on the Nose - An almost Forgotten Hand Tool

Description:
Author: James Donaldson (m)
Vol: 26Year: 2014Month: November
Category: Branding   Topic: Sheep


Subject: First Australian Tool Conference

Description: Detail of Conference agenda
Author:
Vol: 8Year: 1996Month: May
Category: Report   Topic: Conference


Subject: Fitting a handle to a socket chisel

Description: A woodworker reprint
Author:
Vol: 17Year: 2005Month: May
Category: Handle   Topic: Socket Chisel


Subject: Fitting An Adze handle

Description: Adze handle fitment explained
Author: Alan West
Vol: 17Year: 2005Month: August
Category: Handle   Topic: Adze


Subject: Flag Baskets & Carpet Bags

Description: Tool carriers detailed
Author: Ken Turner
Vol: 12Year: 2000Month: November
Category: Baskets   Topic: Bags


Page 5 of 21 Results 241 - 290 of 1048

Tools and Trades Day

HTPAA's Tools and Trades Day is on July 7th 2018 9.00 am to 4.30 pm at St Anthony's Parish Hall (Tool Sale location).
The 2018 Day features nine expert speakers who will discuss and demonstrate their tools in the trades of colonial cabinet making, coopering, jewelry making, harness making, the early mechanics tools, pattern making, plumbing and shipwright/sail making.
For more information see the Tool and Trade Day page.

Next Tool Sale

The next Tool Sale is on Sunday 8th July 2018 9.00 am to 12.30 pm at St Anthony's Parish Hall 164-168 Neerim Rd (corner Neerim & Grange Rds), Carnegie
Melway Ref. 68 F4 or see the map here. For more information see the Tool Sale page.

Go to top