Hand Tool Preservation
Association of Australia Inc
MENU

Raffle 2018

Raffle prizesHTPAA raffle ticketsHTPAA Raffle 2018 is now underway - it is your chance to win one of 3 prizes with a total value of $2,679 courtesy of STANLEY Australia. Tickets are only $5 each and are available in person or online.  For more details of the prizes, where to get your tickets and the Conditions of Entry go to the Raffle 2018 page.

Page 6 of 21 Results 265 - 314 of 1048

Tool Chest ContentsOrder by: Article No SubjectAuthorCategoryYear

Subject: Editor's Note

Description:
Author:
Vol: 28Year: 2016Month: November
Category: Note   Topic: Editor


Subject: Editor's Note - Windmills

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editor   Topic: Windmills


Subject: Editorial Comment - HTPAA Publications

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editorial   Topic: Publications


Subject: Electro Borac Steel

Description: Heat Treatment Explanation
Author: Ian McIntosh
Vol: 6Year: 1994Month: August
Category: Steel Manf   Topic: Electro Borac


Subject: Electrolytic Removal of Dust

Description: Rust removal practice explained
Author: Kevin Chamberlain
Vol: 14Year: 2002Month: February
Category: Cleaning   Topic: Electolytic


Subject: Elegy on a Suburban Tool Chest

Description: Old Tools explained
Author: Roy Fuller
Vol: 9Year: 1997Month: May
Category: Collecting   Topic: Tool Chest


Subject: Engineering in History

Description: A book reviewed
Author:
Vol: 12Year: 2000Month: November
Category: Book   Topic: History


Subject: Engineers Rule & The Phoenix Factory

Description: An early foundry explained
Author: Frank Ham
Vol: 18Year: 2006Month: February
Category: Phoenix   Topic: Foundry


Subject: Engineers' Joint Slide Rules

Description:
Author: Bruce Sandie (m)
Vol: 28Year: 2016Month: February
Category: History   Topic: Slide Rule


Subject: English Sectors & their use

Description: An Explanation
Author: Bruce Sandie
Vol: 18Year: 2006Month: February
Category: History   Topic: Garden Tools


Subject: Ephemera a link with the Past

Description: The importance of paper
Author: Ken Turner
Vol: 13Year: 2001Month: August
Category: Collecting   Topic: Ephemera


Subject: Eric Risstron's Patented Axe Stand

Description:
Author: Graeme Plaw (m)
Vol: 26Year: 2014Month: May
Category: Axe   Topic: Stand


Subject: Ethical Dilemmas - A response

Description: A response to Jim Donaldson
Author: Milt Boyd
Vol: 13Year: 2001Month: May
Category: Collecting   Topic:


Subject: European Concealed Hinge Morticing Chisels

Description:
Author: Svatopluk Odstrcilik (m) & Warren Hewertson (m)
Vol: 25Year: 2013Month: February
Category: Chisels   Topic: Morticing


Subject: Excise & Gauging Slide Rules

Description: Slide Rules explained
Author: Bruce Sandie
Vol: 14Year: 2002Month: August
Category: Rule   Topic: Slide Rules


Subject: Faience

Description: Construction & Application
Author:
Vol: 3Year: 1991Month: June
Category: Glazing   Topic: Wall Tiles


Subject: Farriers Horseshoe Gauge

Description: A Guage explained
Author: Frank Ham
Vol: 18Year: 2006Month: February
Category: Farrier   Topic: Gauge


Subject: Faults in your Plane

Description: Evans Bros Chart
Author:
Vol: 16Year: 2004Month: May
Category: Plane   Topic: Evans Bros


Subject: Fencing & Wire Strainers

Description: A detailed report
Author: Lyle Ruddell
Vol: 12Year: 2000Month: May
Category: Fencing   Topic: Strainer


Subject: Fine Work with Few Tools

Description: A Craftsmans story
Author:
Vol: 8Year: 1996Month: May
Category: Collecting   Topic: Story


Subject: Finger planes

Description: A reprint from TTHS Newsletter No 50
Author:
Vol: 9Year: 1997Month: February
Category: Plane   Topic: Finger


Subject: Fire Branding Sheep on the Nose - An almost Forgotten Hand Tool

Description:
Author: James Donaldson (m)
Vol: 26Year: 2014Month: November
Category: Branding   Topic: Sheep


Subject: First Australian Tool Conference

Description: Detail of Conference agenda
Author:
Vol: 8Year: 1996Month: May
Category: Report   Topic: Conference


Subject: Fitting a handle to a socket chisel

Description: A woodworker reprint
Author:
Vol: 17Year: 2005Month: May
Category: Handle   Topic: Socket Chisel


Subject: Fitting An Adze handle

Description: Adze handle fitment explained
Author: Alan West
Vol: 17Year: 2005Month: August
Category: Handle   Topic: Adze


Subject: Flag Baskets & Carpet Bags

Description: Tool carriers detailed
Author: Ken Turner
Vol: 12Year: 2000Month: November
Category: Baskets   Topic: Bags


Subject: Floor Nailing Gun

Description:
Author: Mick Dowling (m)
Vol: 27Year: 2015Month: February
Category: Nailing   Topic: Floor


Subject: Flying Spanners

Description: Bird Named Spanners
Author: Viv Shepard
Vol: 9Year: 1997Month: May
Category: Wrenches   Topic: Spanner


Subject: Folding Rules

Description: Nomenclature & Joints explained
Author: Frank Ham
Vol: 7Year: 1995Month: May
Category: Rule   Topic: Folding


Subject: Folding rules - A symbol of Continuity

Description: Unchanged 2 foot rule
Author:
Vol: 8Year: 1996Month: May
Category: Rule   Topic: Folding


Subject: Folding Rules Part II

Description: Folding Rules continued
Author: Frank Ham
Vol: 7Year: 1995Month: August
Category: Rule   Topic: Folding


Subject: Food for Thought (about mechanization in woodwork prior to 1820 - Edward Pinto's book on Treen)

Description:
Author: Ian Stagg (m)
Vol: 25Year: 2013Month: February
Category: Woodwork   Topic: Mechanisation


Subject: For the Smithy

Description: McPhersons reprint reviewed
Author: John McDonald
Vol: 9Year: 1997Month: November
Category: Book   Topic: Blacksmithing


Subject: For Whom the Bell Tolls

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Maker


Subject: Forging a Future P C Miller

Description: Another unusual business explained
Author: Graeme Plaw
Vol: 23Year: 2011Month: November
Category: History   Topic: Miller


Subject: Forging a Viking (Ladies) Neck Knife

Description:
Author: Ian Stagg (m)
Vol: 25Year: 2013Month: May
Category: Knife   Topic: Forging


Subject: Forward Thinking

Description: New College Oxford Oaks
Author:
Vol: 21Year: 2009Month: February
Category: Forest   Topic: Oak


Subject: Foundry Work

Description: Appliances & Processes of Sand Moulding
Author:
Vol: 1Year: 1989Month: August
Category: Casting   Topic: Foundry


Subject: Four Centuries of Dutch Plane Makers

Description: Book Review
Author: Astragal Press
Vol: 13Year: 2001Month: November
Category: Book   Topic: Plane Makers


Subject: Four Centuries of Dutch Plane Makers

Description: Another perspective _ Book Review
Author: Trevor Semmens
Vol: 14Year: 2002Month: February
Category: Book   Topic: Plane Makers


Subject: French Sectors and their Use

Description: A complete study on Sectors
Author: Bruce Sandie
Vol: 18Year: 2006Month: November
Category: History   Topic: French Sectors


Subject: From Hand to Machine Shears

Description: Sheep Shears explained
Author: Jim Donaldson
Vol: 13Year: 2001Month: November
Category: Shear   Topic: Sheep


Subject: From the Archives

Description: Discussion of a photo of group outside blacksmith's shop
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: Trades   Topic: Blacksmithing


Subject: From the HTPAA Collection

Description: An item from the collection
Author: Warren Hewertson
Vol: 19Year: 2007Month: August
Category: Scrapers   Topic: E.C.Watkins


Subject: Further notes on Iron oxide & Rust

Description: A study of preventing corrosion
Author: Kevin Chamberlain
Vol: 15Year: 2003Month: August
Category: Cleaning   Topic: Rust


Subject: Further Thoughts on "What is a Hand Tool"

Description: More background thoughts
Author: Ken Turner
Vol: 5Year: 1993Month: December
Category: Communication   Topic: Hand Tools


Subject: Further Thoughts on Tool Knives

Description:
Author: Jeff Miller (m)
Vol: 25Year: 2013Month: May
Category: Maker   Topic: Kaufmann


Subject: Garden Tools

Description: A book reviewed
Author: Graham Thompson
Vol: 17Year: 2005Month: August
Category: Review   Topic: Tools


Subject: Gauges - Marking,Cutting,Slitting,Mortice,Butt, Grasshopper,Panel

Description: A brief history
Author: Watson Cutter
Vol: 6Year: 1994Month: May
Category: Gauges   Topic: Marking


Subject: George Bretnall

Description:
Author: Trevor Semmens (m)
Vol: 25Year: 2013Month: May
Category: History   Topic: Bretnall


Page 6 of 21 Results 265 - 314 of 1048

Next Tool Sale

The next Tool Sale is on Sunday 11th November 2018 9.00 am to 12.30 pm at St Anthony's Parish Hall 164-168 Neerim Rd (corner Neerim & Grange Rds), Carnegie
Melway Ref. 68 F4 or see the map here. For more information see the Tool Sale page.

Go to top