javporn.cc
Hand Tool Preservation
Association of Australia Inc

Page 21 of 21 Results 1001 - 1042 of 1042

Tool Chest ContentsOrder by: Article No SubjectAuthorCategoryYear

Subject: Letter to the Editor

Description:
Author: Fred Murrel (m)
Vol: 28Year: 2016Month: November
Category: Letter   Topic: Whatsit


Subject: Writing and Publishing 'Collecting Titan Chisels'

Description:
Author: Dick Lynch (m)
Vol: 28Year: 2016Month: November
Category: Book   Topic: Writing


Subject: Book Review - The Adjustable Spanner: History, Origins and Development until 1970

Description:
Author: John Hawking (m)
Vol: 28Year: 2016Month: November
Category: Review   Topic: Book


Subject: Bramah Locks

Description:
Author: Mike Preeston (m)
Vol: 28Year: 2016Month: November
Category: Lock   Topic: Bramah


Subject: A History of the Trewhella Jack

Description:
Author: Ben Trewhella
Vol: 28Year: 2016Month: November
Category: History   Topic: Trewhella


Subject: Editor's Note

Description:
Author:
Vol: 28Year: 2016Month: November
Category: Note   Topic: Editor


Subject: A History of the Wheelbarrow Part IV - A Liang Wheelbarrow in Australia

Description:
Author: Warren Hewertson (m)
Vol: 28Year: 2016Month: November
Category: History   Topic: Wheelbarrow


Subject: The Lynn Woodwork Museum - Ashburton, New Zealand

Description:
Author: Trevor Semmens (m)
Vol: 29Year: 2017Month: February
Category: Museum   Topic: Lynn


Subject: Letter to the Editor - The Joseph Bramah Challenge Lock - The Story of the Hobbs' opening

Description:
Author: James Donaldson (m)
Vol: 29Year: 2017Month: February
Category: Letter   Topic: Lock


Subject: Design Features of Stanley Hand Drills

Description:
Author: Richard Williams (m)
Vol: 29Year: 2017Month: February
Category: Hand drills   Topic: Design


Subject: Some Slide Rule History

Description:
Author: R. Bruce Sandie (m)
Vol: 29Year: 2017Month: February
Category: History   Topic: Slide Rule


Subject: Some Mensurtion Tools

Description:
Author: Peter Dickson (m)
Vol: 29Year: 2017Month: February
Category: Tools   Topic: Mensuration


Subject: Pozidrive® in Australia - A Difficult Birth

Description: A history of the development of Pozidrive® screwdrivers and bits and there introduction to Australia.
Author: Graeme Plaw (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Pozidrive


Subject: Book Review - Australian Woodworking Planemakers by Trevor Semmons

Description: Book Review of Australian Woodworking Planemakers by Trevor Semmons
Author: Graeme Plaw (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Book Review - Campaign Furniture by Christopher Schwarz

Description: Book Review of Campaign Furniture by Christopher Schwarz
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Letter to the Editor - The Bramah Lock

Description: Response to previous Bramah Lock article in TC No. 122
Author: Terry Butcher (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: For Whom the Bell Tolls

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Maker


Subject: The Puffing Billy Railway - Its History and Workshop Activities

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Russell Hicks
Vol: 29Year: 2017Month: May
Category: History   Topic: Railway


Subject: Ramsay Standard Catalogue Service - Part 1

Description: A brief history of Ramsay Standard Catalogue Service and Ramsay's Architectural and Engineering Catalogue
Author: Allan Willingham (Hon m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Ramsay


Subject: Ladies Tool Kit

Description: Description of a set of ladies tools found in Op shop
Author: Terry Butcher (m)
Vol: 29Year: 2017Month: August
Category: Tools   Topic: Ladies


Subject: HTPAA Library Display

Description: Story and images of HTPAA's display at Nunawading Library
Author:
Vol: 29Year: 2017Month: August
Category: Display   Topic: Library


Subject: The Hillman Miner's Pick

Description: Brief discussion of the blacksmith J Hillman and his mining pick
Author: Doug McIvor (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Maker


Subject: In My Shed: Ward & Payne Chisels

Description: The story behind a box of rusted chisels
Author: Richard Williams (m)
Vol: 29Year: 2017Month: August
Category: Chisels   Topic: Ward & Payne


Subject: From the Archives

Description: Discussion of a photo of group outside blacksmith's shop
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: Trades   Topic: Blacksmithing


Subject: Kimberley Bench Planes

Description: Story of an unusual Kimberley Bench plane
Author: Gil Rogers (m)
Vol: 29Year: 2017Month: August
Category: Plane   Topic: Kimberley


Subject: Whitchers

Description: A history of shoemaking and shoemakers' tools, particularly whitcher pliers
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Whitchers


Subject: A Tilt at Windmills

Description: A history of windmills, their use and development
Author: Norton Truter (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Windmills


Subject: Ramsay Standard Catalogue Service - Part 2

Description: Continuation of the history of Ramsay Standard Catalogue Service for architects and engineers
Author: Allan Willingham (Hon m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Reference


Subject: A Barnes Scroll Saw Restored

Description:
Author: Rod Paterson (m) & Warren Hewertson (m)
Vol: 29Year: 2017Month: November
Category: Restoration   Topic: Saw


Subject: An Introduction to Post Drills

Description:
Author: Joe Caruana (m), Kevin Cassidy (m) & Dale Schafer
Vol: 29Year: 2017Month: November
Category: Tools   Topic: Drill


Subject: A Chairmaking Course in the Woodlands of the English Midlands

Description:
Author: Ian Stagg (m)
Vol: 29Year: 2017Month: November
Category: Skills   Topic: Chairmaking


Subject: What Makes a Bed Rock?

Description:
Author: Reg Barrand (m)
Vol: 29Year: 2017Month: November
Category: Collecting   Topic: Planes


Subject: Herbert Austin - British Knight and 1st Baron Austin - His Engineering Beginnings in Melbourne

Description:
Author: James Donaldson (m)
Vol: 29Year: 2017Month: November
Category: History   Topic: Makers


Subject: Lever Ratchet Screwdrivers

Description:
Author: Warren Hewertson (m)
Vol: 30Year: 2018Month: February
Category: Tools   Topic: Screwdrivers


Subject: Editor's Note - Windmills

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editor   Topic: Windmills


Subject: Pavement Lights

Description:
Author: Peter Jensen (m)
Vol: 30Year: 2018Month: February
Category: Trades   Topic: Pavements


Subject: Pin Tumbler Locks

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: February
Category: Lock   Topic: Tumbler


Subject: Letter to the Editor - Masonite

Description:
Author: Terry Butcher (m)
Vol: 30Year: 2018Month: February
Category: Letter   Topic: Masonite


Subject: Miners Pick Response

Description:
Author: David Lampard (m HTPSWA)
Vol: 30Year: 2018Month: February
Category: Tools   Topic: Pick


Subject: Book Review - Made to Order by Robert La Nauze

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: February
Category: Review   Topic: Book


Subject: Daniel Harvey - Implement Manufacturer

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: February
Category: History   Topic: Makers


Subject: Editorial Comment - HTPAA Publications

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editorial   Topic: Publications


Page 21 of 21 Results 1001 - 1042 of 1042

Next Tool Sale

The next Tool Sale is on Sunday 18th March 2018 9.00 am to 12.30 pm at St Anthony's Parish Hall 164-168 Neerim Rd (corner Neerim & Grange Rds), Carnegie
Melway Ref. 68 F4 or see the map here. For more information see the Tool Sale page.

Go to top ManyVids.org