javporn.cc
Hand Tool Preservation
Association of Australia Inc

Rescheduled General Meeting - Friday 20th October

Meeting imageATTENTION HTPAA MEMBERS

Due to the normal general meeting on 19th Sptember being cancelled as a result of a power outage, it has been rescheduled. The venue is still Box Hill Community Arts Centre but the meeting is in the Arbour Room, instead of the usual Drycraft studios.

The speakers will be Alan West on Making Vernacular Furniture and Grant Knight on Sharpening Drill Bits.

Page 1 of 43 Results 1 - 24 of 1028

Tool Chest ContentsOrder by: Article No SubjectAuthorCategoryYear

Subject: The Lynn Woodwork Museum - Ashburton, New Zealand

Description:
Author: Trevor Semmens (m)
Vol: 29Year: 2017Month: February
Category: Museum   Topic: Lynn


Subject: Letter to the Editor - The Joseph Bramah Challenge Lock - The Story of the Hobbs' opening

Description:
Author: James Donaldson (m)
Vol: 29Year: 2017Month: February
Category: Letter   Topic: Lock


Subject: Design Features of Stanley Hand Drills

Description:
Author: Richard Williams (m)
Vol: 29Year: 2017Month: February
Category: Hand drills   Topic: Design


Subject: Some Slide Rule History

Description:
Author: R. Bruce Sandie (m)
Vol: 29Year: 2017Month: February
Category: History   Topic: Slide Rule


Subject: Some Mensurtion Tools

Description:
Author: Peter Dickson (m)
Vol: 29Year: 2017Month: February
Category: Tools   Topic: Mensuration


Subject: Pozidrive® in Australia - A Difficult Birth

Description: A history of the development of Pozidrive® screwdrivers and bits and there introduction to Australia.
Author: Graeme Plaw (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Pozidrive


Subject: Book Review - Australian Woodworking Planemakers by Trevor Semmons

Description: Book Review of Australian Woodworking Planemakers by Trevor Semmons
Author: Graeme Plaw (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Book Review - Campaign Furniture by Christopher Schwarz

Description: Book Review of Campaign Furniture by Christopher Schwarz
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Letter to the Editor - The Bramah Lock

Description: Response to previous Bramah Lock article in TC No. 122
Author: Terry Butcher (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: For Whom the Bell Tolls

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Maker


Subject: The Puffing Billy Railway - Its History and Workshop Activities

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Russell Hicks
Vol: 29Year: 2017Month: May
Category: History   Topic: Railway


Subject: Ramsay Standard Catalogue Service - Part 1

Description: A brief history of Ramsay Standard Catalogue Service and Ramsay's Architectural and Engineering Catalogue
Author: Allan Willingham (Hon m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Ramsay


Subject: Ladies Tool Kit

Description: Description of a set of ladies tools found in Op shop
Author: Terry Butcher (m)
Vol: 29Year: 2017Month: August
Category: Tools   Topic: Ladies


Subject: HTPAA Library Display

Description: Story and images of HTPAA's display at Nunawading Library
Author:
Vol: 29Year: 2017Month: August
Category: Display   Topic: Library


Subject: The Hillman Miner's Pick

Description: Brief discussion of the blacksmith J Hillman and his mining pick
Author: Doug McIvor (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Maker


Subject: In My Shed: Ward & Payne Chisels

Description: The story behind a box of rusted chisels
Author: Richard Williams (m)
Vol: 29Year: 2017Month: August
Category: Chisels   Topic: Ward & Payne


Subject: From the Archives

Description: Discussion of a photo of group outside blacksmith's shop
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: Trades   Topic: Blacksmithing


Subject: Kimberley Bench Planes

Description: Story of an unusual Kimberley Bench plane
Author: Gil Rogers (m)
Vol: 29Year: 2017Month: August
Category: Plane   Topic: Kimberley


Subject: Whitchers

Description: A history of shoemaking and shoemakers' tools, particularly whitcher pliers
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Whitchers


Subject: A Tilt at Windmills

Description: A history of windmills, their use and development
Author: Norton Truter (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Windmills


Subject: Ramsay Standard Catalogue Service - Part 2

Description: Continuation of the history of Ramsay Standard Catalogue Service for architects and engineers
Author: Allan Willingham (Hon m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Reference


Subject: Wagon & Carriage Smithing Tools

Description:
Author: Michael Potter (m)
Vol: 28Year: 2016Month: February
Category: Tools   Topic: Smithing


Subject: Miniature Tools

Description:
Author: Graeme Plaw (m)
Vol: 28Year: 2016Month: February
Category: Tools   Topic: Miniature


Subject: In My Shed: Bonzer Can-Opener

Description:
Author: Bruce Williams with Richard Williams (m)
Vol: 28Year: 2016Month: February
Category: Shed   Topic: Can-opener


Page 1 of 43 Results 1 - 24 of 1028

Next Tool Sale

The next Tool Sale is on Sunday 12th November 2017 9.00 am to 12.30 pm at St Anthony's Parish Hall 164-168 Neerim Rd (corner Neerim & Grange Rds), Carnegie
Melway Ref. 68 F4 or see the map here. For more information see the Tool Sale page.

Go to top