Hand Tool Preservation
Association of Australia Inc

Page 1 of 21 Results 1 - 50 of 1048

Tool Chest ContentsOrder by: Article No SubjectAuthorCategoryYear

Subject: Three Early Post Drills

Description:
Author: Keith Houston (m)
Vol: 30Year: 2018Month: May
Category: Tools   Topic: Drills


Subject: Stud Spacings

Description:
Author: Michael Dowling (m)
Vol: 30Year: 2018Month: May
Category: History   Topic: Building design


Subject: Rheem Drum Closure Crimping Tools

Description:
Author: Warren Hewertson (m) & Bruce Mcdonald (m)
Vol: 30Year: 2018Month: May
Category: Tools   Topic: Crimping


Subject: Not Another Jack

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: May
Category: History   Topic: Makers


Subject: Obituary - David R. Russell

Description:
Author:
Vol: 30Year: 2018Month: May
Category: History   Topic: Obituary


Subject: Brace Bits and Drivers

Description:
Author: Richard Williams (m)
Vol: 30Year: 2018Month: May
Category: Drill   Topic: Brace


Subject: Editorial Comment - HTPAA Publications

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editorial   Topic: Publications


Subject: Daniel Harvey - Implement Manufacturer

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: February
Category: History   Topic: Makers


Subject: Book Review - Made to Order by Robert La Nauze

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: February
Category: Review   Topic: Book


Subject: Miners Pick Response

Description:
Author: David Lampard (m HTPSWA)
Vol: 30Year: 2018Month: February
Category: Tools   Topic: Pick


Subject: Letter to the Editor - Masonite

Description:
Author: Terry Butcher (m)
Vol: 30Year: 2018Month: February
Category: Letter   Topic: Masonite


Subject: Pin Tumbler Locks

Description:
Author: Graeme Plaw (m)
Vol: 30Year: 2018Month: February
Category: Lock   Topic: Tumbler


Subject: Pavement Lights

Description:
Author: Peter Jensen (m)
Vol: 30Year: 2018Month: February
Category: Trades   Topic: Pavements


Subject: Editor's Note - Windmills

Description:
Author:
Vol: 30Year: 2018Month: February
Category: Editor   Topic: Windmills


Subject: Lever Ratchet Screwdrivers

Description:
Author: Warren Hewertson (m)
Vol: 30Year: 2018Month: February
Category: Tools   Topic: Screwdrivers


Subject: Herbert Austin - British Knight and 1st Baron Austin - His Engineering Beginnings in Melbourne

Description:
Author: James Donaldson (m)
Vol: 29Year: 2017Month: November
Category: History   Topic: Makers


Subject: What Makes a Bed Rock?

Description:
Author: Reg Barrand (m)
Vol: 29Year: 2017Month: November
Category: Collecting   Topic: Planes


Subject: A Chairmaking Course in the Woodlands of the English Midlands

Description:
Author: Ian Stagg (m)
Vol: 29Year: 2017Month: November
Category: Skills   Topic: Chairmaking


Subject: An Introduction to Post Drills

Description:
Author: Joe Caruana (m), Kevin Cassidy (m) & Dale Schafer
Vol: 29Year: 2017Month: November
Category: Tools   Topic: Drill


Subject: A Barnes Scroll Saw Restored

Description:
Author: Rod Paterson (m) & Warren Hewertson (m)
Vol: 29Year: 2017Month: November
Category: Restoration   Topic: Saw


Subject: Ramsay Standard Catalogue Service - Part 2

Description: Continuation of the history of Ramsay Standard Catalogue Service for architects and engineers
Author: Allan Willingham (Hon m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Reference


Subject: A Tilt at Windmills

Description: A history of windmills, their use and development
Author: Norton Truter (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Windmills


Subject: Whitchers

Description: A history of shoemaking and shoemakers' tools, particularly whitcher pliers
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Whitchers


Subject: Kimberley Bench Planes

Description: Story of an unusual Kimberley Bench plane
Author: Gil Rogers (m)
Vol: 29Year: 2017Month: August
Category: Plane   Topic: Kimberley


Subject: From the Archives

Description: Discussion of a photo of group outside blacksmith's shop
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: August
Category: Trades   Topic: Blacksmithing


Subject: In My Shed: Ward & Payne Chisels

Description: The story behind a box of rusted chisels
Author: Richard Williams (m)
Vol: 29Year: 2017Month: August
Category: Chisels   Topic: Ward & Payne


Subject: The Hillman Miner's Pick

Description: Brief discussion of the blacksmith J Hillman and his mining pick
Author: Doug McIvor (m)
Vol: 29Year: 2017Month: August
Category: History   Topic: Maker


Subject: HTPAA Library Display

Description: Story and images of HTPAA's display at Nunawading Library
Author:
Vol: 29Year: 2017Month: August
Category: Display   Topic: Library


Subject: Ladies Tool Kit

Description: Description of a set of ladies tools found in Op shop
Author: Terry Butcher (m)
Vol: 29Year: 2017Month: August
Category: Tools   Topic: Ladies


Subject: Ramsay Standard Catalogue Service - Part 1

Description: A brief history of Ramsay Standard Catalogue Service and Ramsay's Architectural and Engineering Catalogue
Author: Allan Willingham (Hon m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Ramsay


Subject: The Puffing Billy Railway - Its History and Workshop Activities

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Russell Hicks
Vol: 29Year: 2017Month: May
Category: History   Topic: Railway


Subject: For Whom the Bell Tolls

Description: Short history of Whitechapel Bell Foundry - Britain's oldest company
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Maker


Subject: Letter to the Editor - The Bramah Lock

Description: Response to previous Bramah Lock article in TC No. 122
Author: Terry Butcher (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Book Review - Campaign Furniture by Christopher Schwarz

Description: Book Review of Campaign Furniture by Christopher Schwarz
Author: Warren Hewertson (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Book Review - Australian Woodworking Planemakers by Trevor Semmons

Description: Book Review of Australian Woodworking Planemakers by Trevor Semmons
Author: Graeme Plaw (m)
Vol: 29Year: 2017Month: May
Category: Review   Topic: Book


Subject: Pozidrive® in Australia - A Difficult Birth

Description: A history of the development of Pozidrive® screwdrivers and bits and there introduction to Australia.
Author: Graeme Plaw (m)
Vol: 29Year: 2017Month: May
Category: History   Topic: Pozidrive


Subject: Some Mensurtion Tools

Description:
Author: Peter Dickson (m)
Vol: 29Year: 2017Month: February
Category: Tools   Topic: Mensuration


Subject: Some Slide Rule History

Description:
Author: R. Bruce Sandie (m)
Vol: 29Year: 2017Month: February
Category: History   Topic: Slide Rule


Subject: Design Features of Stanley Hand Drills

Description:
Author: Richard Williams (m)
Vol: 29Year: 2017Month: February
Category: Hand drills   Topic: Design


Subject: Letter to the Editor - The Joseph Bramah Challenge Lock - The Story of the Hobbs' opening

Description:
Author: James Donaldson (m)
Vol: 29Year: 2017Month: February
Category: Letter   Topic: Lock


Subject: The Lynn Woodwork Museum - Ashburton, New Zealand

Description:
Author: Trevor Semmens (m)
Vol: 29Year: 2017Month: February
Category: Museum   Topic: Lynn


Subject: A History of the Wheelbarrow Part IV - A Liang Wheelbarrow in Australia

Description:
Author: Warren Hewertson (m)
Vol: 28Year: 2016Month: November
Category: History   Topic: Wheelbarrow


Subject: Editor's Note

Description:
Author:
Vol: 28Year: 2016Month: November
Category: Note   Topic: Editor


Subject: A History of the Trewhella Jack

Description:
Author: Ben Trewhella
Vol: 28Year: 2016Month: November
Category: History   Topic: Trewhella


Subject: Bramah Locks

Description:
Author: Mike Preeston (m)
Vol: 28Year: 2016Month: November
Category: Lock   Topic: Bramah


Subject: Book Review - The Adjustable Spanner: History, Origins and Development until 1970

Description:
Author: John Hawking (m)
Vol: 28Year: 2016Month: November
Category: Review   Topic: Book


Subject: Writing and Publishing 'Collecting Titan Chisels'

Description:
Author: Dick Lynch (m)
Vol: 28Year: 2016Month: November
Category: Book   Topic: Writing


Subject: Letter to the Editor

Description:
Author: Fred Murrel (m)
Vol: 28Year: 2016Month: November
Category: Letter   Topic: Whatsit


Subject: The Use of Hand-held Blades-shears in Australian Woolsheds and Attempts by the English Manufacturers of Blade-shears to Market Them in the Colonies

Description:
Author: James Donaldson (m)
Vol: 28Year: 2016Month: November
Category: Blades-shears   Topic: Woolshed


Subject: A History of Stanley Hand Drills

Description:
Author: Richard Williams (m)
Vol: 28Year: 2016Month: August
Category: History   Topic: Hand Drills


Page 1 of 21 Results 1 - 50 of 1048

Tools and Trades Day

HTPAA's Tools and Trades Day is on July 7th 2018 9.00 am to 4.30 pm at St Anthony's Parish Hall (Tool Sale location).
The 2018 Day features nine expert speakers who will discuss and demonstrate their tools in the trades of colonial cabinet making, coopering, jewelry making, harness making, the early mechanics tools, pattern making, plumbing and shipwright/sail making.
For more information see the Tool and Trade Day page.

Next Tool Sale

The next Tool Sale is on Sunday 8th July 2018 9.00 am to 12.30 pm at St Anthony's Parish Hall 164-168 Neerim Rd (corner Neerim & Grange Rds), Carnegie
Melway Ref. 68 F4 or see the map here. For more information see the Tool Sale page.

Go to top